Enclosures
Our range of enclosures allow multiple network configurations through their modular design.
They ensure a protection degree IP 43 and IK10.
The enclosures are moulded in reinforced fiberglass polyester. Ivory colour.
They can be embedded, surface-mounted or fixed in the ground by 4 sealing feet.
The access to electrical equipment is provided by a door with triangular lock.
3 types of enclosures complying with the width of standardized busbars:
– REMBT 300: bus bar 6 ranges (JDB 300),
– REMBT 450: bus bar 9 ranges (JDB 450),
– REMBT 600: bus bar 12 ranges (JDB 600).
G3 brackets (standard bus bars)
The brackets identified G3 receive the G3 interchangeable modules.
The connection pads are directly fitted with the 400A resupply sockets through M12 tapped hole.
The spacing between the contact pads is 50 mm.
G3 interchangeable connection modules
3 types of connection modules:
– 240 mm², mechanically tightened, with 3 Ph+N,
– 150 mm², mechanically tightened, with 3 Ph+N,
– 3×35 mm², mechanically tightened, with 3 Ph+N.
2 types of connection and protection cutout modules:
– 60A comprising 4 bases (3 Ph+N),
– 90A comprising 2 bases (Ph+N).
Specifications
HN 63-S-65 specification supplemented by its addendum A – Interchangeability – March 2006.
Degree of protection IP2X, modules in place and cable connected.
Class A according to NF C 63-061 for network connection modules (700 cycles).
Class B according to NF C 63-061 for protection cutout junction modules (200 cycles).
Tightening screws calibrated for tightening conductors.
Connection on bus bar using M12 screws.