They are intended to withstand temperatures up to 70 °C and solar radiation up to 1200 W/m².
They satisfactorily pass the heating rod test at 960 °C and have excellent resistance to heat (over 125 °C).
Closed using a standard 11-mm triangular-headed screw, embedded and sealable (padlocking optional for the 1800).
The door can be fitted by affixing the upper part, allowing good natural ventilation.
Wall-fastened, surface-mounted or embedded. Can also be attached to a post with lug strips.
Incoming cable and feeder on the bottom of the box through universal stepped and watertight cable threaders.
They are made of glass fibre reinforced polyester, grey in colour, formed by hot-press moulding, and are self-extinguishing.
These boxes are watertight. Degree of protection IP 43, in accordance with standards NF EN 20010 and 60529.
Impact resistance IK 09, in accordance with standards NF EN 50120 and NF C 20015.
Electronic equipment:
– 4 single-phase 16 A sockets (2P+E female with flap)
IP 44 from the NF standard,
– 2 lever switches IP 41,
– 1 openable, transparent window hatch allowing access to the circuit breaker,
– 1 incoming cable on 3 terminal units of 16 mm² max. capacity (E+PH+N),
– 2 feeders on 2 terminals N+Ph for light circuit.
Electronic protection:
– general differential protection 40 A 30 mA,
– each group of 2 sockets is protected
with a 20 A circuit breaker,
– each light circuit is protected by a 10 A circuit breaker.
